{"title":"AFE POWER \/ CHEVROLET","description":"","products":[{"product_id":"afe-control-suspension-logic-electronic-shock-delete-modules-436-401001-n-chevrolet-corvette-2005-2013-c6","title":"AFE CONTROL \/ SUSPENSION LOGIC ELECTRONIC SHOCK DELETE MODULES (436-401001-N) *** CHEVROLET CORVETTE (2005-2013) C6","description":"\u003cp\u003eAFE Control Electronic Shock Delete Modules are a simple plug and play module that eliminate the suspension control check engine light allowing installation of aftermarket shocks or coilovers on vehicles previously equipped with GM \"MagneRide\" electronic shock absorbers. A body control module check engine light will limit vehicle speeds to 80mph if not bypassed. These modules are sold as a set of four.\u003c\/p\u003e\n\u003cp\u003eNote: When using our shock delete modules on raised or lowered vehicles, ride height simulators (AFE-436-401003-B) are required.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eProduct Features:\u003c\/p\u003e\n\u003cp\u003e* Simple Plug and Play Installation.\u003c\/p\u003e\n\u003cp\u003e* Eliminates Suspension Control Check Engine Light.\u003c\/p\u003e\n\u003cp\u003e* Anodized Extruded Aluminum Heat Sinks.\u003c\/p\u003e\n\u003cp\u003e* GM-Style Metri-Pack Connectors.\u003c\/p\u003e\n\u003cp\u003e* Abrasion Resistant Braided Wiring Shields\u003c\/p\u003e\n\u003cp\u003e---\u003c\/p\u003e\n\u003cp\u003eNOTE: WHEN USING OUR SHOCK DELETE MODULES ON RAISED OR LOWERED VEHICLES, RIDE HEIGHT SIMULATORS (AFE-436-401003-B) ARE REQUIRED.\u003c\/p\u003e\n\u003cp\u003eEMISSIONS DISCLAIMER: THIS PRODUCT DOES NOT REQUIRE A CARB EO#.\u003c\/p\u003e\n\u003cp\u003eFITMENT NOTE: WILL NOT WORK ON CHEVROLET CORVETTE GRANDSPORT MODELS.\u003c\/p\u003e\n\u003cp\u003e---\u003c\/p\u003e\n\u003cp\u003eFITS:\u003c\/p\u003e\n\u003cp\u003e* 2009 CADILLAC CTS-V (V8) 6.2L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2010 CADILLAC CTS-V (V8) 6.2L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2011 CADILLAC CTS-V (V8) 6.2L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2012 CADILLAC CTS-V (V8) 6.2L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2013 CADILLAC CTS-V (V8) 6.2L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2014 CADILLAC CTS-V (V8) 6.2L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2015 CADILLAC CTS-V (V8) 6.2L ENGINE\u003c\/p\u003e\n\u003cp\u003eFITS:\u003c\/p\u003e\n\u003cp\u003e* 2005 CHEVROLET CORVETTE (C6) 6.0L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2006 CHEVROLET CORVETTE (C6) 6.0L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2007 CHEVROLET CORVETTE (C6) 6.0L ENGINE\u003c\/p\u003e\n\u003cp\u003eFITS:\u003c\/p\u003e\n\u003cp\u003e* 2008 CHEVROLET CORVETTE (C6) 6.2L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2009 CHEVROLET CORVETTE (C6) 6.2L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2010 CHEVROLET CORVETTE (C6) 6.2L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2011 CHEVROLET CORVETTE (C6) 6.2L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2012 CHEVROLET CORVETTE (C6) 6.2L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2013 CHEVROLET CORVETTE (C6) 6.2L ENGINE\u003c\/p\u003e\n\u003cp\u003eFITS:\u003c\/p\u003e\n\u003cp\u003e* 2006 CHEVROLET CORVETTE Z06 (C6) 7.0L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2007 CHEVROLET CORVETTE Z06 (C6) 7.0L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2008 CHEVROLET CORVETTE Z06 (C6) 7.0L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2009 CHEVROLET CORVETTE Z06 (C6) 7.0L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2010 CHEVROLET CORVETTE Z06 (C6) 7.0L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2011 CHEVROLET CORVETTE Z06 (C6) 7.0L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2012 CHEVROLET CORVETTE Z06 (C6) 7.0L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2013 CHEVROLET CORVETTE Z06 (C6) 7.0L ENGINE\u003c\/p\u003e\n\u003cp\u003eFITS:\u003c\/p\u003e\n\u003cp\u003e* 2009 CHEVROLET CORVETTE ZR1 (C6) 6.2L SUPERCHARGED\u003c\/p\u003e\n\u003cp\u003e* 2010 CHEVROLET CORVETTE ZR1 (C6) 6.2L SUPERCHARGED\u003c\/p\u003e\n\u003cp\u003e* 2011 CHEVROLET CORVETTE ZR1 (C6) 6.2L SUPERCHARGED\u003c\/p\u003e\n\u003cp\u003e* 2012 CHEVROLET CORVETTE ZR1 (C6) 6.2L SUPERCHARGED\u003c\/p\u003e\n\u003cp\u003e* 2013 CHEVROLET CORVETTE ZR1 (C6) 6.2L SUPERCHARGED\u003c\/p\u003e","brand":"AFE POWER","offers":[{"title":"Default Title","offer_id":46466755592418,"sku":"AFE-436-401001-N","price":375.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/0669\/1554\/files\/436-401001-n_1.webp?v=1743193457"},{"product_id":"afe-control-ride-height-simulators-436-401003-b-chevrolet-corvette-1997-2013-c5-c6","title":"AFE CONTROL \/ RIDE HEIGHT SIMULATORS (436-401003-B) *** CHEVROLET CORVETTE (1997-2013) C5 \/ C6","description":"\u003cp\u003eAFE Control Ride Height Simulator modules are a simple plug and play connector that allows installation of aftermarket lowering or lift kits that change vehicle ride height more than 1.00 Inch. These work in tandem with our Electronic Shock Delete kit (AFE-436-401001-N). These Modules are sold as a set of four.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eProduct Features:\u003c\/p\u003e\n\u003cp\u003e* Eliminates Suspension Control Error Light When Lowered\/Raised more than 1.00 Inch.\u003c\/p\u003e\n\u003cp\u003e* High Temp Thermal Epoxy.\u003c\/p\u003e\n\u003cp\u003e* Simple Plug-and-Play Installation.\u003c\/p\u003e\n\u003cp\u003e* GM Style Weatherpack Connector.\u003c\/p\u003e\n\u003cp\u003e* Direct Fit Installation Requires No Modifications.\u003c\/p\u003e\n\u003cp\u003e* Proudly Made in the USA.\u003c\/p\u003e\n\u003cp\u003e---\u003c\/p\u003e\n\u003cp\u003eNOTE: THESE WORK IN TANDEM WITH OUR ELECTRONIC SHOCK DELETE KIT (AFE-436-401001-N).\u003c\/p\u003e\n\u003cp\u003eEMISSIONS DISCLAIMER: THIS PRODUCT DOES NOT REQUIRE A CARB EO#.\u003c\/p\u003e\n\u003cp\u003e---\u003c\/p\u003e\n\u003cp\u003eFITS:\u003c\/p\u003e\n\u003cp\u003e* 2009 CADILLAC CTS-V (V8) 6.2L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2010 CADILLAC CTS-V (V8) 6.2L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2011 CADILLAC CTS-V (V8) 6.2L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2012 CADILLAC CTS-V (V8) 6.2L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2013 CADILLAC CTS-V (V8) 6.2L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2014 CADILLAC CTS-V (V8) 6.2L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2015 CADILLAC CTS-V (V8) 6.2L ENGINE\u003c\/p\u003e\n\u003cp\u003eFITS:\u003c\/p\u003e\n\u003cp\u003e* 1997 CHEVROLET CORVETTE (C5) 5.7L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 1998 CHEVROLET CORVETTE (C5) 5.7L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 1999 CHEVROLET CORVETTE (C5) 5.7L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2000 CHEVROLET CORVETTE (C5) 5.7L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2001 CHEVROLET CORVETTE (C5) 5.7L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2002 CHEVROLET CORVETTE (C5) 5.7L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2003 CHEVROLET CORVETTE (C5) 5.7L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2004 CHEVROLET CORVETTE (C5) 5.7L ENGINE\u003c\/p\u003e\n\u003cp\u003eFITS:\u003c\/p\u003e\n\u003cp\u003e* 2005 CHEVROLET CORVETTE (C6) 6.0L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2006 CHEVROLET CORVETTE (C6) 6.0L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2007 CHEVROLET CORVETTE (C6) 6.0L ENGINE\u003c\/p\u003e\n\u003cp\u003eFITS:\u003c\/p\u003e\n\u003cp\u003e* 2008 CHEVROLET CORVETTE (C6) 6.2L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2009 CHEVROLET CORVETTE (C6) 6.2L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2010 CHEVROLET CORVETTE (C6) 6.2L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2011 CHEVROLET CORVETTE (C6) 6.2L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2012 CHEVROLET CORVETTE (C6) 6.2L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2013 CHEVROLET CORVETTE (C6) 6.2L ENGINE\u003c\/p\u003e\n\u003cp\u003eFITS:\u003c\/p\u003e\n\u003cp\u003e* 2001 CHEVROLET CORVETTE Z06 (C5) 5.7L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2002 CHEVROLET CORVETTE Z06 (C5) 5.7L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2003 CHEVROLET CORVETTE Z06 (C5) 5.7L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2004 CHEVROLET CORVETTE Z06 (C5) 5.7L ENGINE\u003c\/p\u003e\n\u003cp\u003eFITS:\u003c\/p\u003e\n\u003cp\u003e* 2006 CHEVROLET CORVETTE Z06 (C6) 7.0L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2007 CHEVROLET CORVETTE Z06 (C6) 7.0L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2008 CHEVROLET CORVETTE Z06 (C6) 7.0L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2009 CHEVROLET CORVETTE Z06 (C6) 7.0L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2010 CHEVROLET CORVETTE Z06 (C6) 7.0L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2011 CHEVROLET CORVETTE Z06 (C6) 7.0L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2012 CHEVROLET CORVETTE Z06 (C6) 7.0L ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2013 CHEVROLET CORVETTE Z06 (C6) 7.0L ENGINE\u003c\/p\u003e\n\u003cp\u003eFITS:\u003c\/p\u003e\n\u003cp\u003e* 2009 CHEVROLET CORVETTE ZR1 (C6) 6.2L SUPERCHARGED\u003c\/p\u003e\n\u003cp\u003e* 2010 CHEVROLET CORVETTE ZR1 (C6) 6.2L SUPERCHARGED\u003c\/p\u003e\n\u003cp\u003e* 2011 CHEVROLET CORVETTE ZR1 (C6) 6.2L SUPERCHARGED\u003c\/p\u003e\n\u003cp\u003e* 2012 CHEVROLET CORVETTE ZR1 (C6) 6.2L SUPERCHARGED\u003c\/p\u003e\n\u003cp\u003e* 2013 CHEVROLET CORVETTE ZR1 (C6) 6.2L SUPERCHARGED\u003c\/p\u003e","brand":"AFE POWER","offers":[{"title":"Default Title","offer_id":46466778300642,"sku":"AFE-436-401003-B","price":145.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/0669\/1554\/files\/436-401003-b_1.webp?v=1743194792"},{"product_id":"afe-momentum-gt-cold-air-intake-system-pro-5r-oiled-filter-54-74212-chevrolet-camaro-2016-2023-2-0l-turbo","title":"AFE \/ MOMENTUM GT \/ COLD AIR INTAKE SYSTEM \/ PRO-5R OILED FILTER (54-74212) *** CHEVROLET CAMARO (2016-2023) 2.0L TURBO","description":"\u003cp\u003eUnique One-Piece High Quality Housing w\/ Sight Window: A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of black cross-linked polyethylene. A urethane plug is also included if you wish to completely seal the auxiliary air inlet. (US PAT 9440175) For Filter-to-Housing Interface.\u003c\/p\u003e\n\u003cp\u003eHigh Quality Tube: This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Also included is a high quality billet aluminum crankcase fitting provided for easy installation.\u003c\/p\u003e\n\u003cp\u003eHigh Quality Scoop: A high quality CAD air scoop guides cool ambient air to the performance air filter.\u003c\/p\u003e\n\u003cp\u003eLarge 5-Layer Performance Air Filter: This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cylindrical filter has a large oval (6-3\/4\" x 4-3\/4\") flange and is 9\" tall inverted top Pro 5R filter media. The Pro 5R performance air filter features 5-layers of progressively finer mesh cotton gauze oiled media and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles.\u003c\/p\u003e\n\u003cp\u003ePremium Hardware: Premium stainless steel clamps and a silicone coupling are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eProduct Features:\u003c\/p\u003e\n\u003cp\u003e* Dyno-Proven Gains up to +24 HP \/ +25 TQ.\u003c\/p\u003e\n\u003cp\u003e* Outflows Factory Intake by 21%.\u003c\/p\u003e\n\u003cp\u003e* One-Piece Roto-Molded Sealed Housing w\/ Auxiliary Air Inlet.\u003c\/p\u003e\n\u003cp\u003e* Built-In Sight Window Provides Easy Inspection of Filter Without Disassembly.\u003c\/p\u003e\n\u003cp\u003e* Scoop Snaps into Airbox and Directs Cool Air Into Intake System for Maximum Performance .\u003c\/p\u003e\n\u003cp\u003e* Unique (US PAT 9440175) Filter-to-Housing Interface for Easy Installation.\u003c\/p\u003e\n\u003cp\u003e---\u003c\/p\u003e\n\u003cp\u003eNOTE: This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.\u003c\/p\u003e\n\u003cp\u003e---\u003c\/p\u003e\n\u003cp\u003eFITS:\u003c\/p\u003e\n\u003cp\u003e* 2016 CHEVROLET CAMARO (4 CYL) 2.0L TURBO\u003c\/p\u003e\n\u003cp\u003e* 2017 CHEVROLET CAMARO (4 CYL) 2.0L TURBO\u003c\/p\u003e\n\u003cp\u003e* 2018 CHEVROLET CAMARO (4 CYL) 2.0L TURBO\u003c\/p\u003e\n\u003cp\u003e* 2019 CHEVROLET CAMARO (4 CYL) 2.0L TURBO\u003c\/p\u003e\n\u003cp\u003e* 2020 CHEVROLET CAMARO (4 CYL) 2.0L TURBO\u003c\/p\u003e\n\u003cp\u003e* 2021 CHEVROLET CAMARO (4 CYL) 2.0L TURBO\u003c\/p\u003e\n\u003cp\u003e* 2022 CHEVROLET CAMARO (4 CYL) 2.0L TURBO\u003c\/p\u003e\n\u003cp\u003e* 2023 CHEVROLET CAMARO (4 CYL) 2.0L TURBO\u003c\/p\u003e","brand":"AFE POWER","offers":[{"title":"Default Title","offer_id":46534356566242,"sku":"AFE-54-74212","price":410.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/0669\/1554\/files\/54-74212_1.webp?v=1745856538"},{"product_id":"afe-momentum-gt-cold-air-intake-system-pro-dry-s-filter-51-74212-chevrolet-camaro-2016-2023-2-0l-turbo","title":"AFE \/ MOMENTUM GT \/ COLD AIR INTAKE SYSTEM \/ PRO-DRY-S FILTER (51-74212) *** CHEVROLET CAMARO (2016-2023) 2.0L TURBO","description":"\u003cp\u003eUnique One-Piece High Quality Housing w\/ Sight Window: A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of black cross-linked polyethylene. A urethane plug is also included if you wish to completely seal the auxiliary air inlet. (US PAT 9440175) For Filter-to-Housing Interface.\u003c\/p\u003e\n\u003cp\u003eHigh Quality Tube: This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Also included is a high quality billet aluminum crankcase fitting provided for easy installation.\u003c\/p\u003e\n\u003cp\u003eHigh Quality Scoop: A high quality CAD air scoop guides cool ambient air to the performance air filter.\u003c\/p\u003e\n\u003cp\u003eLarge 3-Layer Performance Air Filter: This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cylindrical filter has a large oval (6-3\/4\" x 4-3\/4\") flange and is 9\" tall inverted top Pro DRY S filter media. The Pro DRY S performance air filter features 3-layers of progressive finer porosity synthetic media providing maximum convenience with 100% polyurethane frame for long life and multiple cleaning cycles.\u003c\/p\u003e\n\u003cp\u003ePremium Hardware: Premium stainless steel clamps and a silicone coupling are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eProduct Features:\u003c\/p\u003e\n\u003cp\u003e* Dyno-Proven Gains up to +24 HP \/ +25 TQ.\u003c\/p\u003e\n\u003cp\u003e* One-Piece Roto-Molded Intake Tube w\/ Resonance Chamber.\u003c\/p\u003e\n\u003cp\u003e* Built-In Sight Window Provides Easy Inspection of Filter Without Disassembly.\u003c\/p\u003e\n\u003cp\u003e* Scoop Simply Snaps into Airbox and Directs Cool Air Into Intake System for Maximum Performance.\u003c\/p\u003e\n\u003cp\u003e* Washable and Reusable Pro DRY S Air Filter for Maximum Convenience.\u003c\/p\u003e\n\u003cp\u003e* Unique (US PAT 9440175) Filter-to-Housing Interface for Easy Installation.\u003c\/p\u003e\n\u003cp\u003e---\u003c\/p\u003e\n\u003cp\u003eNOTE: This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.\u003c\/p\u003e\n\u003cp\u003e---\u003c\/p\u003e\n\u003cp\u003eFITS:\u003c\/p\u003e\n\u003cp\u003e* 2016 CHEVROLET CAMARO (4 CYL) 2.0L TURBO\u003c\/p\u003e\n\u003cp\u003e* 2017 CHEVROLET CAMARO (4 CYL) 2.0L TURBO\u003c\/p\u003e\n\u003cp\u003e* 2018 CHEVROLET CAMARO (4 CYL) 2.0L TURBO\u003c\/p\u003e\n\u003cp\u003e* 2019 CHEVROLET CAMARO (4 CYL) 2.0L TURBO\u003c\/p\u003e\n\u003cp\u003e* 2020 CHEVROLET CAMARO (4 CYL) 2.0L TURBO\u003c\/p\u003e\n\u003cp\u003e* 2021 CHEVROLET CAMARO (4 CYL) 2.0L TURBO\u003c\/p\u003e\n\u003cp\u003e* 2022 CHEVROLET CAMARO (4 CYL) 2.0L TURBO\u003c\/p\u003e\n\u003cp\u003e* 2023 CHEVROLET CAMARO (4 CYL) 2.0L TURBO\u003c\/p\u003e","brand":"AFE POWER","offers":[{"title":"Default Title","offer_id":46534398902498,"sku":"AFE-51-74212","price":420.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/0669\/1554\/files\/51-74212_1.webp?v=1745857822"},{"product_id":"afe-twisted-steel-3-00-inch-exhaust-turbo-down-pipe-with-high-flow-cat-48-34126-hc-chevrolet-camaro-2016-2023-2-0l-turbo","title":"AFE \/ TWISTED STEEL 3.00 INCH EXHAUST \/ TURBO DOWN-PIPE WITH HIGH FLOW CAT (48-34126-HC) *** CHEVROLET CAMARO (2016-2023) 2.0L TURBO","description":"\u003cp\u003eAFE POWER introduces an all new Twisted Steel \"Street\" down-pipe for the Cadillac ATS with 2.0L turbo engine. This street version down-pipe is designed using a 400 cpsi catalytic converter and constructed of 3\" 100% TIG-welded, mandrel-bent, Bushed, 304 stainless steel tubing for optimum flow, resulting in added horsepower and torque. This performance down-pipe utilizes 1\/2\" thick 304 stainless steel flanges and comes with an additional O2 Bung for tuning. This unit includes an O-ring and mounting hardware for a hassle-free installation.\u003c\/p\u003e\n\u003cp\u003eCatalytic Converter: This system utilizes a 400 CPSI (cell per square inch) catalytic converter for maximum flow.\u003c\/p\u003e\n\u003cp\u003eO2 Sensor: Includes an additional bung for either a wide-band O₂gauge or auxiliary instrumentation.\u003c\/p\u003e\n\u003cp\u003eFactory Mounting Locations: This down-pipe mounts directly to OE mounting locations and includes hardware for a hassle-free installation.\u003c\/p\u003e\n\u003cp\u003e1\/2\" Laser-Cut Flanges: 1\/2\" Thick, OE-Style, 304 stainless steel, laser-cut flanges provide a superior sealing surface. The turbo flange features a machined O-ring groove.\u003c\/p\u003e\n\u003cp\u003eTIG-Welded: 100% TIG-Welded by certified craftsmen for race proven strength and durability. TIG welding provides the strongest welds, reducing stress cracks.\u003c\/p\u003e\n\u003cp\u003eBrushed 304 SS Construction: This down-pipe is constructed of 3\", mandrel-bent, brushed 304 stainless steel tubing for maximum performance, corrosion resistance and strength, eliminating cracking.\u003c\/p\u003e\n\u003cp\u003eEmissions Disclaimer: This product is EPA compliant, not for sale or use on vehicles certified for the state of California. Consult your state or local authority for any additional clarification. Replacement of catalytic converters (if equipped) is allowed only under the following conditions: 1) if the vehicle is missing a converter; 2) if a state or local inspection program has determined the existing converter has been lead-poisoned or damaged or otherwise needs replacement; or 3) if the vehicle is more than five (5) years old or has more than 50,000 miles and a legitimate need for replacement has been established and documented. This product only fits those vehicles as listed in the application table.\u003c\/p\u003e\n\u003cp\u003eAll aFe POWER turbo downpipes are engineered and manufactured in our Corona, California facility.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eProduct Features:\u003c\/p\u003e\n\u003cp\u003e* Utilizes a 400 CPSI Catalytic Converter for Maximum Flow.\u003c\/p\u003e\n\u003cp\u003e* Additional Bug for Wide-Band O2 Gauge or Auxiliary Instrumentation.\u003c\/p\u003e\n\u003cp\u003e* Constructed from 3\" Mandrel-Bent, Brushed Finish 304 Stainless Steel.\u003c\/p\u003e\n\u003cp\u003e* Utilizes 1\/2\" Thick, OE-Style 304 Stainless Steel Laser-Cut Flanges.\u003c\/p\u003e\n\u003cp\u003e* Turbo Flange Features a Machined O-Ring Groove.\u003c\/p\u003e\n\u003cp\u003e* Includes an O-Ring and Hardware for a Hassle-Free Installation.\u003c\/p\u003e\n\u003cp\u003e* 100% Hand TIG Welded by Certified Craftsmen for Race-Proven Strength and Durability.\u003c\/p\u003e\n\u003cp\u003e---\u003c\/p\u003e\n\u003cp\u003eFITS:\u003c\/p\u003e\n\u003cp\u003e* 2013 CADILLAC ATS (4 CYL) 2.0L TURBO\u003c\/p\u003e\n\u003cp\u003e* 2014 CADILLAC ATS (4 CYL) 2.0L TURBO\u003c\/p\u003e\n\u003cp\u003e* 2015 CADILLAC ATS (4 CYL) 2.0L TURBO\u003c\/p\u003e\n\u003cp\u003e* 2016 CADILLAC ATS (4 CYL) 2.0L TURBO\u003c\/p\u003e\n\u003cp\u003e* 2017 CADILLAC ATS (4 CYL) 2.0L TURBO\u003c\/p\u003e\n\u003cp\u003e* 2018 CADILLAC ATS (4 CYL) 2.0L TURBO\u003c\/p\u003e\n\u003cp\u003e* 2019 CADILLAC ATS (4 CYL) 2.0L TURBO\u003c\/p\u003e\n\u003cp\u003eFITS:\u003c\/p\u003e\n\u003cp\u003e* 2016 CHEVROLET CAMARO (4 CYL) 2.0L TURBO\u003c\/p\u003e\n\u003cp\u003e* 2017 CHEVROLET CAMARO (4 CYL) 2.0L TURBO\u003c\/p\u003e\n\u003cp\u003e* 2018 CHEVROLET CAMARO (4 CYL) 2.0L TURBO\u003c\/p\u003e\n\u003cp\u003e* 2019 CHEVROLET CAMARO (4 CYL) 2.0L TURBO\u003c\/p\u003e\n\u003cp\u003e* 2020 CHEVROLET CAMARO (4 CYL) 2.0L TURBO\u003c\/p\u003e\n\u003cp\u003e* 2021 CHEVROLET CAMARO (4 CYL) 2.0L TURBO\u003c\/p\u003e\n\u003cp\u003e* 2022 CHEVROLET CAMARO (4 CYL) 2.0L TURBO\u003c\/p\u003e\n\u003cp\u003e* 2023 CHEVROLET CAMARO (4 CYL) 2.0L TURBO\u003c\/p\u003e","brand":"AFE POWER","offers":[{"title":"Default Title","offer_id":46534413385954,"sku":"AFE-48-34126-HC","price":1325.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/0669\/1554\/files\/48-34126-hca1600.webp?v=1745858584"},{"product_id":"afe-twisted-steel-3-00-inch-exhaust-turbo-down-pipe-with-high-flow-cat-48-34126-hc-cadillac-ats-2013-2019-2-0l-turbo","title":"AFE \/ TWISTED STEEL 3.00 INCH EXHAUST \/ TURBO DOWN-PIPE WITH HIGH FLOW CAT (48-34126-HC) *** CADILLAC ATS (2013-2019), CHEVROLET CAMARO (2016-2023) 2.0L TURBO","description":"\u003cp\u003eAFE POWER introduces an all new Twisted Steel \"Street\" down-pipe for the Cadillac ATS with 2.0L turbo engine. This street version down-pipe is designed using a 400 cpsi catalytic converter and constructed of 3\" 100% TIG-welded, mandrel-bent, Bushed, 304 stainless steel tubing for optimum flow, resulting in added horsepower and torque. This performance down-pipe utilizes 1\/2\" thick 304 stainless steel flanges and comes with an additional O2 Bung for tuning. This unit includes an O-ring and mounting hardware for a hassle-free installation.\u003c\/p\u003e\n\u003cp\u003eCatalytic Converter: This system utilizes a 400 CPSI (cell per square inch) catalytic converter for maximum flow.\u003c\/p\u003e\n\u003cp\u003eO2 Sensor: Includes an additional bung for either a wide-band O₂gauge or auxiliary instrumentation.\u003c\/p\u003e\n\u003cp\u003eFactory Mounting Locations: This down-pipe mounts directly to OE mounting locations and includes hardware for a hassle-free installation.\u003c\/p\u003e\n\u003cp\u003e1\/2\" Laser-Cut Flanges: 1\/2\" Thick, OE-Style, 304 stainless steel, laser-cut flanges provide a superior sealing surface. The turbo flange features a machined O-ring groove.\u003c\/p\u003e\n\u003cp\u003eTIG-Welded: 100% TIG-Welded by certified craftsmen for race proven strength and durability. TIG welding provides the strongest welds, reducing stress cracks.\u003c\/p\u003e\n\u003cp\u003eBrushed 304 SS Construction: This down-pipe is constructed of 3\", mandrel-bent, brushed 304 stainless steel tubing for maximum performance, corrosion resistance and strength, eliminating cracking.\u003c\/p\u003e\n\u003cp\u003eEmissions Disclaimer: This product is EPA compliant, not for sale or use on vehicles certified for the state of California. Consult your state or local authority for any additional clarification. Replacement of catalytic converters (if equipped) is allowed only under the following conditions: 1) if the vehicle is missing a converter; 2) if a state or local inspection program has determined the existing converter has been lead-poisoned or damaged or otherwise needs replacement; or 3) if the vehicle is more than five (5) years old or has more than 50,000 miles and a legitimate need for replacement has been established and documented. This product only fits those vehicles as listed in the application table.\u003c\/p\u003e\n\u003cp\u003eAll aFe POWER turbo downpipes are engineered and manufactured in our Corona, California facility.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eProduct Features:\u003c\/p\u003e\n\u003cp\u003e* Utilizes a 400 CPSI Catalytic Converter for Maximum Flow.\u003c\/p\u003e\n\u003cp\u003e* Additional Bug for Wide-Band O2 Gauge or Auxiliary Instrumentation.\u003c\/p\u003e\n\u003cp\u003e* Constructed from 3\" Mandrel-Bent, Brushed Finish 304 Stainless Steel.\u003c\/p\u003e\n\u003cp\u003e* Utilizes 1\/2\" Thick, OE-Style 304 Stainless Steel Laser-Cut Flanges.\u003c\/p\u003e\n\u003cp\u003e* Turbo Flange Features a Machined O-Ring Groove.\u003c\/p\u003e\n\u003cp\u003e* Includes an O-Ring and Hardware for a Hassle-Free Installation.\u003c\/p\u003e\n\u003cp\u003e* 100% Hand TIG Welded by Certified Craftsmen for Race-Proven Strength and Durability.\u003c\/p\u003e\n\u003cp\u003e---\u003c\/p\u003e\n\u003cp\u003eFITS:\u003c\/p\u003e\n\u003cp\u003e* 2013 CADILLAC ATS (4 CYL) 2.0L TURBO\u003c\/p\u003e\n\u003cp\u003e* 2014 CADILLAC ATS (4 CYL) 2.0L TURBO\u003c\/p\u003e\n\u003cp\u003e* 2015 CADILLAC ATS (4 CYL) 2.0L TURBO\u003c\/p\u003e\n\u003cp\u003e* 2016 CADILLAC ATS (4 CYL) 2.0L TURBO\u003c\/p\u003e\n\u003cp\u003e* 2017 CADILLAC ATS (4 CYL) 2.0L TURBO\u003c\/p\u003e\n\u003cp\u003e* 2018 CADILLAC ATS (4 CYL) 2.0L TURBO\u003c\/p\u003e\n\u003cp\u003e* 2019 CADILLAC ATS (4 CYL) 2.0L TURBO\u003c\/p\u003e\n\u003cp\u003eFITS:\u003c\/p\u003e\n\u003cp\u003e* 2016 CHEVROLET CAMARO (4 CYL) 2.0L TURBO\u003c\/p\u003e\n\u003cp\u003e* 2017 CHEVROLET CAMARO (4 CYL) 2.0L TURBO\u003c\/p\u003e\n\u003cp\u003e* 2018 CHEVROLET CAMARO (4 CYL) 2.0L TURBO\u003c\/p\u003e\n\u003cp\u003e* 2019 CHEVROLET CAMARO (4 CYL) 2.0L TURBO\u003c\/p\u003e\n\u003cp\u003e* 2020 CHEVROLET CAMARO (4 CYL) 2.0L TURBO\u003c\/p\u003e\n\u003cp\u003e* 2021 CHEVROLET CAMARO (4 CYL) 2.0L TURBO\u003c\/p\u003e\n\u003cp\u003e* 2022 CHEVROLET CAMARO (4 CYL) 2.0L TURBO\u003c\/p\u003e\n\u003cp\u003e* 2023 CHEVROLET CAMARO (4 CYL) 2.0L TURBO\u003c\/p\u003e","brand":"AFE POWER","offers":[{"title":"Default Title","offer_id":46534459261154,"sku":"AFE-48-34126-HC","price":1325.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/0669\/1554\/files\/48-34126-hca1600.webp?v=1745858584"},{"product_id":"afe-magnum-force-cold-air-intake-system-black-piping-54-12022-chevrolet-camaro-v6-2010-2015-3-6l-engine","title":"AFE \/ MAGNUM FORCE \/ COLD AIR INTAKE SYSTEM \/ BLACK PIPING (54-12022) *** CHEVROLET CAMARO V6 (2010-2015) 3.6L ENGINE","description":"\u003cp\u003eThis cold air intake system resulted in +14 horsepower, +20 torque max gain and outflowed the factory intake by 21% on the 2012-2015 Chevrolet Camaro (3.6L) V6 Engine. Included in this cold air intake system, is a 18 gauge powder-coated heat shield and a massive 8.00 Inch tall, aFe Power Pro 5R filter. The air filter uses a unique (patent-pending) flange retention design that allows the filter to be securely mounted to the heat shield without any hardware. A one-piece mandrel-bent wrinkle-black powder-coated intake tube maximizes air velocity providing maximum performance and throttle response. This is a direct bolt-on kit and requires no cutting or drilling on OEM parts.\u003c\/p\u003e\n\u003cp\u003eFilter Flange Retention Design: The air filter uses a unique patent pending flange retention design that requires no hardware to mount the filter to the heat shield to provide a quick hassle-free installation with minimal hardware.\u003c\/p\u003e\n\u003cp\u003e8.00 Inch Tall 360 Degree Air Filter: A massive 8.00 Inch air filter is used for maximum flow and performance filtration. The Pro 5R performance air filter features 5-layers of progressively finer mesh cotton gauze media and is constructed with 100% polyurethane for long life and multiple cleaning cycles.\u003c\/p\u003e\n\u003cp\u003eOne-Piece Filter Housing: The air filter is housed in a one-piece, black powder-coated 18-gauge heat shield that keeps warm engine air out for maximum performance.\u003c\/p\u003e\n\u003cp\u003eHassle-Free Installation: aFe has developed this intake to provide a hassle-free installation that utilizes all factory mounting locations.\u003c\/p\u003e\n\u003cp\u003eDyno-Tested Intake Tube: The intake tube is designed to maximize air velocity and is dyno-tested and flowed using the latest engineering tools for maximum performance and throttle response.\u003c\/p\u003e\n\u003cp\u003eNote: This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eProduct Features:\u003c\/p\u003e\n\u003cp\u003e* Dyno-Proven Gains up to +14 HP \/ +20 TQ.\u003c\/p\u003e\n\u003cp\u003e* Outflows Factory by 21%.\u003c\/p\u003e\n\u003cp\u003e* Washable and Reusable Pro 5R Air Filter for Maximum Performance.\u003c\/p\u003e\n\u003cp\u003e* One-Piece Black Powder-Coated 18 Gauge Heat Shield.\u003c\/p\u003e\n\u003cp\u003e* Heat-Insulating XLPE Polymer Tube Provides a Direct Airflow Path.\u003c\/p\u003e\n\u003cp\u003e---\u003c\/p\u003e\n\u003cp\u003eFITS:\u003c\/p\u003e\n\u003cp\u003e* 2010 CHEVROLET CAMARO (3.6L) V6 ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2011 CHEVROLET CAMARO (3.6L) V6 ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2012 CHEVROLET CAMARO (3.6L) V6 ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2013 CHEVROLET CAMARO (3.6L) V6 ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2014 CHEVROLET CAMARO (3.6L) V6 ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2015 CHEVROLET CAMARO (3.6L) V6 ENGINE\u003c\/p\u003e","brand":"AFE POWER","offers":[{"title":"Default Title","offer_id":46621049094370,"sku":"AFE-54-12022","price":395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/0669\/1554\/files\/54-12022a1600.webp?v=1749597000"},{"product_id":"afe-silver-bullet-throttle-body-spacer-46-34010-chevrolet-camaro-v6-2010-2015-3-6l-engine","title":"AFE \/ SILVER BULLET \/ THROTTLE BODY SPACER (46-34010) *** CHEVROLET CAMARO V6 (2010-2015) 3.6L ENGINE","description":"\u003cp\u003eThe Silver Bullet throttle body spacer is constructed from precision machined 6061-T6 billet aluminum and is designed using a serrated\/helix design that creates turbulence in the airflow at the point just prior to entry into the engine optimizing the combustion cycle. This turbulence helps the air\/fuel charge burn completely providing increased horsepower, torque and improved throttle response. During testing, Silver Bullet throttle body spacer have resulted in +7 Horsepower and +8 torque max gains.\u003c\/p\u003e\n\u003cp\u003eSerrated\/Helix Design: The Serrated\/Helix design creates air turbulence in the intake manifold. This turbulence increases the air pressure in the combustion chamber resulting in increased horsepower, torque and improved throttle response. The Serrated\/Helix combination design also reduces intake whistle that occurs with other Helix only designs.\u003c\/p\u003e\n\u003cp\u003e6061-T6 Billet Aluminum Construction: All Silver Bullet Throttle Body Spacers are precision machined from 6061-T6 billet aluminum for lightweight, high strength and perfect fit and finish.\u003c\/p\u003e\n\u003cp\u003eInstallation Is A Snap: This Silver Bullet throttle body spacer uses all factory mounting locations providing stability and a hassle-free installation.\u003c\/p\u003e\n\u003cp\u003eEmissions Disclaimer: This throttle body spacer is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.\u003c\/p\u003e\n\u003cp\u003eFitment Note: This item does not work with Blazer, Acacia, or Cadillac XT5 OE intake system. Requires 50-70071R intake system for these models.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eProduct Features:\u003c\/p\u003e\n\u003cp\u003e* Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior to entry of the engine - increasing performance, as well as improving throttle response.\u003c\/p\u003e\n\u003cp\u003e* Dyno-Proven Gains up to +7 HP \/ +8 TQ.\u003c\/p\u003e\n\u003cp\u003e* Constructed from Durable 6061-T6 Billet Aluminum.\u003c\/p\u003e\n\u003cp\u003e* Unique Serrated\/Helix Entry Design Creates Turbulence and Eliminates Whistle Sound.\u003c\/p\u003e\n\u003cp\u003e* Increases Air Intake Speed, Improving Performance \u0026amp; Throttle Response.\u003c\/p\u003e\n\u003cp\u003e---\u003c\/p\u003e\n\u003cp\u003eFITS:\u003c\/p\u003e\n\u003cp\u003e* 2010 CHEVROLET CAMARO (3.6L) V6 ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2011 CHEVROLET CAMARO (3.6L) V6 ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2012 CHEVROLET CAMARO (3.6L) V6 ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2013 CHEVROLET CAMARO (3.6L) V6 ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2014 CHEVROLET CAMARO (3.6L) V6 ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2015 CHEVROLET CAMARO (3.6L) V6 ENGINE\u003c\/p\u003e","brand":"AFE POWER","offers":[{"title":"Default Title","offer_id":46621073244386,"sku":"AFE-46-34010","price":140.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/0669\/1554\/files\/46-34010a1600.webp?v=1749598542"}],"url":"https:\/\/phantasmtuning.myshopify.com\/collections\/afe-power-chevrolet.oembed","provider":"PHANTASM","version":"1.0","type":"link"}