{"title":"HONDA CIVIC SI (2012-2015) GEN 9 \/ 2.4L \/ K24 ENGINE","description":"","products":[{"product_id":"bc-racing-br-series-coilover-suspension-kit-a-58-br-honda-civic-base-2012-2015-civic-si-2012-2013","title":"BC RACING \/ BR SERIES COILOVER \/ SUSPENSION KIT (A-58-BR) *** HONDA CIVIC BASE (2012-2015), CIVIC SI (2012-2013)","description":"\u003cp\u003eThe BC Racing BR Series offers the most affordable entry into coilover suspension without sacrificing performance, comfort, build quality, vehicle height, or handling. This is done by extensively testing each vehicle, then refining the coilover characteristics as many times as needed to ensure the most well-balanced and affordable aftermarket suspension conceivable. With meticulously chosen spring rates, damper valving, and one of the widest adjustment ranges in the industry, you can’t go wrong with the BC Racing BR Series Coilover System.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eProduct Features:\u003c\/p\u003e\n\u003cp\u003e* Highly Customizable.\u003c\/p\u003e\n\u003cp\u003e* Mono Tube Shock Design.\u003c\/p\u003e\n\u003cp\u003e* Linear Piston and Damping Curve.\u003c\/p\u003e\n\u003cp\u003e* Height Adjustment Independent of Spring Compression.\u003c\/p\u003e\n\u003cp\u003e* 30 Clicks of Simultaneous Compression \/ Rebound Adjustment.\u003c\/p\u003e\n\u003cp\u003e* Front Camber Plates Standard on Applicable Kits.\u003c\/p\u003e\n\u003cp\u003e* Rear Camber Plates are Available for Applicable Kits.\u003c\/p\u003e\n\u003cp\u003e* Custom Spring Rates and Swift Springs are Available.\u003c\/p\u003e\n\u003cp\u003e* Custom Valving or Valving Paired for Custom Spring Rates.\u003c\/p\u003e\n\u003cp\u003e* 1 Year Warranty Against Manufacturer's Defect.\u003c\/p\u003e\n\u003cp\u003e* Fully Rebuildable.\u003c\/p\u003e\n\u003cp\u003e---\u003c\/p\u003e\n\u003cp\u003eFITS:\u003c\/p\u003e\n\u003cp\u003e* 2013 ACURA ILX (2.4L) SEDAN\u003c\/p\u003e\n\u003cp\u003e* 2014 ACURA ILX (2.4L) SEDAN\u003c\/p\u003e\n\u003cp\u003e* 2015 ACURA ILX (2.4L) SEDAN\u003c\/p\u003e\n\u003cp\u003eFITS:\u003c\/p\u003e\n\u003cp\u003e* 2012 HONDA CIVIC NON-SI (1.8L) COUPE \/ SEDAN\u003c\/p\u003e\n\u003cp\u003e* 2013 HONDA CIVIC NON-SI (1.8L) COUPE \/ SEDAN\u003c\/p\u003e\n\u003cp\u003e* 2014 HONDA CIVIC NON-SI (1.8L) COUPE \/ SEDAN\u003c\/p\u003e\n\u003cp\u003e* 2015 HONDA CIVIC NON-SI (1.8L) COUPE \/ SEDAN\u003c\/p\u003e\n\u003cp\u003eFITS:\u003c\/p\u003e\n\u003cp\u003e* 2012 HONDA CIVIC SI (2.4L) COUPE \/ SEDAN\u003c\/p\u003e\n\u003cp\u003e* 2013 HONDA CIVIC SI (2.4L) COUPE \/ SEDAN\u003c\/p\u003e","brand":"BC RACING","offers":[{"title":"Default Title","offer_id":46485551382754,"sku":"BC-RACING-A-58-BR","price":1195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/0669\/1554\/files\/BCRACINGBRSERIESCOILOVERSUSPENSIONKIT01-800X_542853ff-ad09-444a-944d-5e542ed434bf.jpg?v=1743888180"},{"product_id":"bc-racing-br-series-coilover-suspension-kit-a-97-br-honda-civic-si-2014-2015","title":"BC RACING \/ BR SERIES COILOVER \/ SUSPENSION KIT (A-97-BR) *** HONDA CIVIC SI (2014-2015)","description":"\u003cp\u003eThe BC Racing BR Series offers the most affordable entry into coilover suspension without sacrificing performance, comfort, build quality, vehicle height, or handling. This is done by extensively testing each vehicle, then refining the coilover characteristics as many times as needed to ensure the most well-balanced and affordable aftermarket suspension conceivable. With meticulously chosen spring rates, damper valving, and one of the widest adjustment ranges in the industry, you can’t go wrong with the BC Racing BR Series Coilover System.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eProduct Features:\u003c\/p\u003e\n\u003cp\u003e* Highly Customizable.\u003c\/p\u003e\n\u003cp\u003e* Mono Tube Shock Design.\u003c\/p\u003e\n\u003cp\u003e* Linear Piston and Damping Curve.\u003c\/p\u003e\n\u003cp\u003e* Height Adjustment Independent of Spring Compression.\u003c\/p\u003e\n\u003cp\u003e* 30 Clicks of Simultaneous Compression \/ Rebound Adjustment.\u003c\/p\u003e\n\u003cp\u003e* Front Camber Plates Standard on Applicable Kits.\u003c\/p\u003e\n\u003cp\u003e* Rear Camber Plates are Available for Applicable Kits.\u003c\/p\u003e\n\u003cp\u003e* Custom Spring Rates and Swift Springs are Available.\u003c\/p\u003e\n\u003cp\u003e* Custom Valving or Valving Paired for Custom Spring Rates.\u003c\/p\u003e\n\u003cp\u003e* 1 Year Warranty Against Manufacturer's Defect.\u003c\/p\u003e\n\u003cp\u003e* Fully Rebuildable.\u003c\/p\u003e\n\u003cp\u003e---\u003c\/p\u003e\n\u003cp\u003eFITS:\u003c\/p\u003e\n\u003cp\u003e* 2016 ACURA ILX (2.4L) SEDAN\u003c\/p\u003e\n\u003cp\u003e* 2017 ACURA ILX (2.4L) SEDAN\u003c\/p\u003e\n\u003cp\u003e* 2018 ACURA ILX (2.4L) SEDAN\u003c\/p\u003e\n\u003cp\u003e* 2019 ACURA ILX (2.4L) SEDAN\u003c\/p\u003e\n\u003cp\u003e* 2020 ACURA ILX (2.4L) SEDAN\u003c\/p\u003e\n\u003cp\u003e* 2021 ACURA ILX (2.4L) SEDAN\u003c\/p\u003e\n\u003cp\u003e* 2022 ACURA ILX (2.4L) SEDAN\u003c\/p\u003e\n\u003cp\u003eFITS:\u003c\/p\u003e\n\u003cp\u003e* 2014 HONDA CIVIC SI (2.4L) COUPE \/ SEDAN\u003c\/p\u003e\n\u003cp\u003e* 2015 HONDA CIVIC SI (2.4L) COUPE \/ SEDAN\u003c\/p\u003e","brand":"BC RACING","offers":[{"title":"Default Title","offer_id":46485751365858,"sku":"BC-RACING-A-97-BR","price":1195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/0669\/1554\/files\/BCRACINGBRSERIESCOILOVERSUSPENSIONKIT01-800X_9b8dd6b8-b302-4c59-806f-f6054b322cb0.jpg?v=1743890997"},{"product_id":"bc-racing-br-series-extreme-low-coilover-suspension-kit-a-97e-br-honda-civic-si-2014-2015","title":"BC RACING \/ BR SERIES EXTREME LOW COILOVER \/ SUSPENSION KIT (A-97E-BR) *** HONDA CIVIC SI (2014-2015)","description":"\u003cp\u003eThe BC Racing BR Series offers the most affordable entry into coilover suspension without sacrificing performance, comfort, build quality, vehicle height, or handling. This is done by extensively testing each vehicle, then refining the coilover characteristics as many times as needed to ensure the most well-balanced and affordable aftermarket suspension conceivable. With meticulously chosen spring rates, damper valving, and one of the widest adjustment ranges in the industry, you can’t go wrong with the BC Racing BR Series Coilover System.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eProduct Features:\u003c\/p\u003e\n\u003cp\u003e* Highly Customizable.\u003c\/p\u003e\n\u003cp\u003e* Mono Tube Shock Design.\u003c\/p\u003e\n\u003cp\u003e* Linear Piston and Damping Curve.\u003c\/p\u003e\n\u003cp\u003e* Height Adjustment Independent of Spring Compression.\u003c\/p\u003e\n\u003cp\u003e* 30 Clicks of Simultaneous Compression \/ Rebound Adjustment.\u003c\/p\u003e\n\u003cp\u003e* Front Camber Plates Standard on Applicable Kits.\u003c\/p\u003e\n\u003cp\u003e* Rear Camber Plates are Available for Applicable Kits.\u003c\/p\u003e\n\u003cp\u003e* Custom Spring Rates and Swift Springs are Available.\u003c\/p\u003e\n\u003cp\u003e* Custom Valving or Valving Paired for Custom Spring Rates.\u003c\/p\u003e\n\u003cp\u003e* 1 Year Warranty Against Manufacturer's Defect.\u003c\/p\u003e\n\u003cp\u003e* Fully Rebuildable.\u003c\/p\u003e\n\u003cp\u003e---\u003c\/p\u003e\n\u003cp\u003eFITS:\u003c\/p\u003e\n\u003cp\u003e* 2016 ACURA ILX (2.4L) SEDAN\u003c\/p\u003e\n\u003cp\u003e* 2017 ACURA ILX (2.4L) SEDAN\u003c\/p\u003e\n\u003cp\u003e* 2018 ACURA ILX (2.4L) SEDAN\u003c\/p\u003e\n\u003cp\u003e* 2019 ACURA ILX (2.4L) SEDAN\u003c\/p\u003e\n\u003cp\u003e* 2020 ACURA ILX (2.4L) SEDAN\u003c\/p\u003e\n\u003cp\u003e* 2021 ACURA ILX (2.4L) SEDAN\u003c\/p\u003e\n\u003cp\u003e* 2022 ACURA ILX (2.4L) SEDAN\u003c\/p\u003e\n\u003cp\u003eFITS:\u003c\/p\u003e\n\u003cp\u003e* 2014 HONDA CIVIC SI (2.4L) COUPE \/ SEDAN\u003c\/p\u003e\n\u003cp\u003e* 2015 HONDA CIVIC SI (2.4L) COUPE \/ SEDAN\u003c\/p\u003e","brand":"BC RACING","offers":[{"title":"Default Title","offer_id":46486632825058,"sku":"BC-RACING-A-97E-BR","price":1195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/0669\/1554\/files\/BCRACINGBRSERIESCOILOVERSUSPENSIONKIT01-800X_dabec01e-0dbe-462a-835b-2090b2b0105b.jpg?v=1743918325"},{"product_id":"d2-racing-rs-series-coilover-suspension-kit-d-hn-25-honda-civic-base-2012-2015-civic-si-2012-2013","title":"D2 RACING \/ RS SERIES COILOVER \/ SUSPENSION KIT (D-HN-25) *** HONDA CIVIC BASE (2012-2015), CIVIC SI (2012-2013)","description":"\u003cp\u003eThe RS Series Coilover, our flagship coilover has been an affordable mid-level favorite since being originally introduced over 20 years ago. Featuring a 36-way damping adjustable monotube design, RS Series coilovers are perfect for the modified street car that also sees occasional track days. This coilover has separate height and preload adjustments, allowing for optimal suspension tuning while always maintaining full strut stroke. For an enthusiast seeking a balance between performance and lowered stance, the RS Series Coilover Kit is the ultimate upgrade.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eProduct Features:\u003c\/p\u003e\n\u003cp\u003e* 36 Way damping adjustable monotube shock assemblies.\u003c\/p\u003e\n\u003cp\u003e* Full ride height adjustability with separate spring preload.\u003c\/p\u003e\n\u003cp\u003e* Anodized finish and Teflon coated threads to prevent rust.\u003c\/p\u003e\n\u003cp\u003e* Upper camber plates and pillow ball mounts.\u003c\/p\u003e\n\u003cp\u003e* 1 Year Manufacturer's Warranty.\u003c\/p\u003e\n\u003cp\u003e* Serviceable in the USA.\u003c\/p\u003e\n\u003cp\u003e---\u003c\/p\u003e\n\u003cp\u003eFITS:\u003c\/p\u003e\n\u003cp\u003e* 2013 ACURA ILX (2.4L) SEDAN\u003c\/p\u003e\n\u003cp\u003e* 2014 ACURA ILX (2.4L) SEDAN\u003c\/p\u003e\n\u003cp\u003e* 2015 ACURA ILX (2.4L) SEDAN\u003c\/p\u003e\n\u003cp\u003eFITS:\u003c\/p\u003e\n\u003cp\u003e* 2012 HONDA CIVIC NON-SI (1.8L) COUPE \/ SEDAN\u003c\/p\u003e\n\u003cp\u003e* 2013 HONDA CIVIC NON-SI (1.8L) COUPE \/ SEDAN\u003c\/p\u003e\n\u003cp\u003e* 2014 HONDA CIVIC NON-SI (1.8L) COUPE \/ SEDAN\u003c\/p\u003e\n\u003cp\u003e* 2015 HONDA CIVIC NON-SI (1.8L) COUPE \/ SEDAN\u003c\/p\u003e\n\u003cp\u003eFITS:\u003c\/p\u003e\n\u003cp\u003e* 2012 HONDA CIVIC SI (2.4L) COUPE \/ SEDAN\u003c\/p\u003e\n\u003cp\u003e* 2013 HONDA CIVIC SI (2.4L) COUPE \/ SEDAN\u003c\/p\u003e","brand":"D2 RACING","offers":[{"title":"Default Title","offer_id":46505129541858,"sku":"D2-RACING-D-HN-25","price":1035.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/0669\/1554\/files\/D2RACING-RSCOILOVERSUSPENSIONKIT01-800X_74f8e318-0d6e-4213-bc6c-bbfc05e2e383.jpg?v=1742186933"},{"product_id":"d2-racing-rs-series-coilover-suspension-kit-d-hn-25-2-honda-civic-si-2014-2015","title":"D2 RACING \/ RS SERIES COILOVER \/ SUSPENSION KIT (D-HN-25-2) *** HONDA CIVIC SI (2014-2015)","description":"\u003cp\u003eThe RS Series Coilover, our flagship coilover has been an affordable mid-level favorite since being originally introduced over 20 years ago. Featuring a 36-way damping adjustable monotube design, RS Series coilovers are perfect for the modified street car that also sees occasional track days. This coilover has separate height and preload adjustments, allowing for optimal suspension tuning while always maintaining full strut stroke. For an enthusiast seeking a balance between performance and lowered stance, the RS Series Coilover Kit is the ultimate upgrade.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eProduct Features:\u003c\/p\u003e\n\u003cp\u003e* 36 Way damping adjustable monotube shock assemblies.\u003c\/p\u003e\n\u003cp\u003e* Full ride height adjustability with separate spring preload.\u003c\/p\u003e\n\u003cp\u003e* Anodized finish and Teflon-coated threads to prevent rust.\u003c\/p\u003e\n\u003cp\u003e* Upper camber plates and pillow ball mounts.\u003c\/p\u003e\n\u003cp\u003e* 1 Year Manufacturer's Warranty.\u003c\/p\u003e\n\u003cp\u003e* Serviceable in the USA.\u003c\/p\u003e\n\u003cp\u003e---\u003c\/p\u003e\n\u003cp\u003eFITS:\u003c\/p\u003e\n\u003cp\u003e* 2016 ACURA ILX (2.4L) SEDAN\u003c\/p\u003e\n\u003cp\u003e* 2017 ACURA ILX (2.4L) SEDAN\u003c\/p\u003e\n\u003cp\u003e* 2018 ACURA ILX (2.4L) SEDAN\u003c\/p\u003e\n\u003cp\u003e* 2019 ACURA ILX (2.4L) SEDAN\u003c\/p\u003e\n\u003cp\u003e* 2020 ACURA ILX (2.4L) SEDAN\u003c\/p\u003e\n\u003cp\u003e* 2021 ACURA ILX (2.4L) SEDAN\u003c\/p\u003e\n\u003cp\u003e* 2022 ACURA ILX (2.4L) SEDAN\u003c\/p\u003e\n\u003cp\u003eFITS:\u003c\/p\u003e\n\u003cp\u003e* 2014 HONDA CIVIC SI (2.4L) COUPE \/ SEDAN\u003c\/p\u003e\n\u003cp\u003e* 2015 HONDA CIVIC SI (2.4L) COUPE \/ SEDAN\u003c\/p\u003e","brand":"D2 RACING","offers":[{"title":"Default Title","offer_id":46507702943970,"sku":"D2-RACING-D-HN-25-2","price":1035.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/0669\/1554\/files\/D2RACING-RSCOILOVERSUSPENSIONKIT01-800X_89833a1a-dd8f-4075-9f0e-9452c0c00304.jpg?v=1742189725"},{"product_id":"hondata-flashpro-mini-engine-performance-tuner-fp-civic-12-honda-civic-si-2012-2015-2-4l-k24-engine","title":"HONDATA \/ FLASHPRO MINI \/ ENGINE PERFORMANCE TUNER (FP-CIVIC-1215) *** HONDA CIVIC SI (2012-2015) 2.4L \/ K24 ENGINE","description":"\u003cp\u003eThe Hondata FlashPro is THE best tuning, data logging, and engine parameter viewing product for your Honda or Acura. It was developed by Hondata specifically for newer Honda vehicles. More than just an ECU performance tuner \"chip\", the FlashPro is the portable premier tuning and data logging solution for your Honda\/Acura, and has the reliability, flexibility, and ease of use you've come to expect from Hondata products.\u003c\/p\u003e\n\u003cp\u003eThe Hondata FlashPro ECU programmer allows full user tuning and data logging, and includes a Windows based software called FlashPro Manager. The FlashPro connects from your laptop's USB port to your vehicles diagnostic port to provide ECU programming with a variety of calibrations with extensive real time and stored data logging capabilities. There is no ECU to send in. Just plug in, hit the program button, and you're ready to go!\u003c\/p\u003e\n\u003cp\u003eEmissions Warning: This product is not designed for public highway or street use, and is only legal for formally sanctioned race use on a racing vehicle that may never be used on a public highway or street.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eProduct Features:\u003c\/p\u003e\n\u003cp\u003e* Instant horsepower gains! Simply set it up, plug it into your Honda\/Acura, and upload a tune.\u003c\/p\u003e\n\u003cp\u003e* Portable programmable ECU interface - Not just an ECU performance tuner \"chip\" that you can't change.\u003c\/p\u003e\n\u003cp\u003e* Extremely simple installation - Just connect to your OBD2 diagnostic port!\u003c\/p\u003e\n\u003cp\u003e* No ECU modification necessary.\u003c\/p\u003e\n\u003cp\u003e* NEW: Bluetooth enabled! Use your iOS or Android device to download the free Hondata Mobile app that can communicate with your Bluetooth enabled FlashPro. See engine operation from your mobile device, check and clear engine codes, monitor engine sensors, setup custom gauges, set your shift light, and more! See more information @ http:\/\/www.hondata.com\/mobile.html.\u003c\/p\u003e\n\u003cp\u003e* NEW: LIVE TUNING. Live tuning gives you the ability to tune your Honda\/Acura on the fly without switching off the engine. Live tuning simplifies part throttle tuning and significantly reduces the time and cost of tuning your Honda\/Acura.\u003c\/p\u003e\n\u003cp\u003e* 20 hours on board data logging memory!\u003c\/p\u003e\n\u003cp\u003e* Includes FlashPro Manager Windows software.\u003c\/p\u003e\n\u003cp\u003e* Check and clear diagnostic codes.\u003c\/p\u003e\n\u003cp\u003e* Custom laptop gauges.\u003c\/p\u003e\n\u003cp\u003e* Theft mitigation.\u003c\/p\u003e\n\u003cp\u003e* Security password.\u003c\/p\u003e\n\u003cp\u003e* Dual calibration storage - Upload from one of two calibrations stored in the FlashPro. Perfect for switching between \"low\" and \"high\" power tunes.\u003c\/p\u003e\n\u003cp\u003e* Computer (laptop or desktop) with a USB 2.0 connection, and Microsoft Windows (32 and 64-bit Windows versions are both supported). Also works on Intel based Macs running Boot Camp or Parallels.\u003c\/p\u003e\n\u003cp\u003e---\u003c\/p\u003e\n\u003cp\u003eOther Features (Varies depending on application):\u003c\/p\u003e\n\u003cp\u003e* NEW: E85 Flex Fuel tuning capabilities.\u003c\/p\u003e\n\u003cp\u003e* Tune \/ change factory boost levels on 2016+ Honda Civic Turbo, 2018+ Honda Accord Turbo.\u003c\/p\u003e\n\u003cp\u003e* Includes many naturally aspirated and forced induction base maps. This means that for most basic part configurations, you do not even have to get your vehicle custom tuned.\u003c\/p\u003e\n\u003cp\u003e* Full Throttle Shifting (especially good on factory turbo cars for eliminating the turbo lag between shifts).\u003c\/p\u003e\n\u003cp\u003e* Choice of MAF or MAP based tuning.\u003c\/p\u003e\n\u003cp\u003e* Support for MAP based forced induction (up to about 43 PSI).\u003c\/p\u003e\n\u003cp\u003e* Support for larger injectors.\u003c\/p\u003e\n\u003cp\u003e* Injector latency \/ dead time.\u003c\/p\u003e\n\u003cp\u003e* Ignition, fuel, cam angle table editing (plus expanded tables for forced induction).\u003c\/p\u003e\n\u003cp\u003e* VTEC window modification.\u003c\/p\u003e\n\u003cp\u003e* Speedometer adjustment.\u003c\/p\u003e\n\u003cp\u003e* Misfire detection disable (useful for preventing CELs when using light flywheels).\u003c\/p\u003e\n\u003cp\u003e* Idle speed adjustment.\u003c\/p\u003e\n\u003cp\u003e* Rev, launch and speed limiters can be adjusted.\u003c\/p\u003e\n\u003cp\u003e* In-Car Adjustable Launch RPM (without re-flashing).\u003c\/p\u003e\n\u003cp\u003e* Re-Flash Progress Indication via Tachometer.\u003c\/p\u003e\n\u003cp\u003e* Air-Fuel Ratio (Lambda Display) via Tachometer.\u003c\/p\u003e\n\u003cp\u003e* Race vehicle sensor disabling.\u003c\/p\u003e\n\u003cp\u003e* Map tracing and lambda overlay.\u003c\/p\u003e\n\u003cp\u003e* 50 degree cam angle movement for more mid-range torque (up from 45 degrees maximum).\u003c\/p\u003e\n\u003cp\u003e* Fully functional cruise control (for vehicles equipped with cruise control).\u003c\/p\u003e\n\u003cp\u003e* Individual cylinder fuel \u0026amp; ignition trim.\u003c\/p\u003e\n\u003cp\u003e* Individual cylinder knock data logging.\u003c\/p\u003e\n\u003cp\u003e* Boost control by RPM and gear.\u003c\/p\u003e\n\u003cp\u003e* Improves Rev Hang.\u003c\/p\u003e\n\u003cp\u003e* Plus other compensation and trim tables.\u003c\/p\u003e\n\u003cp\u003e* Many more features in addition to these!\u003c\/p\u003e\n\u003cp\u003e---\u003c\/p\u003e\n\u003cp\u003eFITS:\u003c\/p\u003e\n\u003cp\u003e* 2012 ACURA ILX (2.4L) K24 ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2013 ACURA ILX (2.4L) K24 ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2014 ACURA ILX (2.4L) K24 ENGINE\u003c\/p\u003e\n\u003cp\u003eFITS:\u003c\/p\u003e\n\u003cp\u003e* 2012 HONDA CIVIC SI (2.4L) K24 ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2013 HONDA CIVIC SI (2.4L) K24 ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2014 HONDA CIVIC SI (2.4L) K24 ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2015 HONDA CIVIC SI (2.4L) K24 ENGINE\u003c\/p\u003e","brand":"HONDATA","offers":[{"title":"Default Title","offer_id":46529420361954,"sku":"HONDATA-FP-2012SI-US","price":795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/0669\/1554\/files\/HONDATAFLASHPROMINI-RACEPERFORMANCETUNER01-1000-X25_08b9a83e-d36b-4158-8d14-868d0c42903c.jpg?v=1742408784"},{"product_id":"afe-takeda-momentum-cold-air-intake-system-pro-oiled-filter-tm-1018p-r-honda-civic-si-2012-2015-2-4l-k24-engine","title":"AFE \/ TAKEDA MOMENTUM \/ COLD AIR INTAKE SYSTEM \/ PRO-OILED FILTER (TM-1018P-R) *** HONDA CIVIC SI (2012-2015) 2.4L \/ K24 ENGINE","description":"\u003cp\u003eThe all new Takeda Momentum Sealed Intake System produces up to +20 HP and +18 Torque over stock, while outflowing the factory intake by 42%. Unlike other Takeda intakes, this system uses a Pro 5R progressive mesh five layer filter for maximum airflow and convenience. This system uses a unique roto-molded sealed air box designed to increase airflow using the factory ram air scoop for maximum torque in all weather situations. Takeda intakes come complete with all necessary hardware.\u003c\/p\u003e\n\u003cp\u003eUses Factory Air Scoop: Features a one-piece roto-molded airbox that incorporates the factory front air scoop that captures cold air from the front of the vehicle.\u003c\/p\u003e\n\u003cp\u003e\"Rounded Nose\" Filter Top: An aerodynamic rounded filter top is used to reduce air resistance and direct airflow smoothly into the intake track.\u003c\/p\u003e\n\u003cp\u003eHousing\/Air Filter Interface: This intake system features a unique patent pending filter to air box interface that creates a flawless seal.\u003c\/p\u003e\n\u003cp\u003eEmissions Disclaimer: Some or all of the applications listed are 50-state exempt, please see CARB EO# D-550-16 for details.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eProduct Features:\u003c\/p\u003e\n\u003cp\u003e* Dyno-Proven Gains up to +20 HP \/ +18 TQ.\u003c\/p\u003e\n\u003cp\u003e* Outflows Factory Intake by 42%.\u003c\/p\u003e\n\u003cp\u003e* Sealed Housing Captures Cool Air Directly From Factory Inlet.\u003c\/p\u003e\n\u003cp\u003e* Dyno-Tuned Air Intake Tube.\u003c\/p\u003e\n\u003cp\u003e* Innovative Filter-to-Housing Interface and Minimal Hardware for Fast and Easy Installation.\u003c\/p\u003e\n\u003cp\u003e* Washable and Reusable Pro 5R Air Filter for Maximum Performance.\u003c\/p\u003e\n\u003cp\u003e* Washable and Reusable Pro DRY S Air Filter for Maximum Convenience.\u003c\/p\u003e\n\u003cp\u003e---\u003c\/p\u003e\n\u003cp\u003eFITS:\u003c\/p\u003e\n\u003cp\u003e* 2012 ACURA ILX (2.4L) K24 ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2013 ACURA ILX (2.4L) K24 ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2014 ACURA ILX (2.4L) K24 ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2015 ACURA ILX (2.4L) K24 ENGINE\u003c\/p\u003e\n\u003cp\u003eFITS:\u003c\/p\u003e\n\u003cp\u003e* 2012 HONDA CIVIC SI (2.4L) K24 ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2013 HONDA CIVIC SI (2.4L) K24 ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2014 HONDA CIVIC SI (2.4L) K24 ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2015 HONDA CIVIC SI (2.4L) K24 ENGINE\u003c\/p\u003e","brand":"AFE POWER","offers":[{"title":"Default Title","offer_id":46624912802018,"sku":"AFE-TM-1018P-R","price":385.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/0669\/1554\/files\/tm-1018p-r_8.webp?v=1749741542"},{"product_id":"afe-takeda-momentum-cold-air-intake-system-pro-dry-filter-tm-1018p-d-honda-civic-si-2012-2015-2-4l-k24-engine","title":"AFE \/ TAKEDA MOMENTUM \/ COLD AIR INTAKE SYSTEM \/ PRO-DRY FILTER (TM-1018P-D) *** HONDA CIVIC SI (2012-2015) 2.4L \/ K24 ENGINE","description":"\u003cp\u003eThe all new Takeda Momentum Sealed Intake System produces up to +20 Horsepower and +18 Torque over stock, while outflowing the factory intake by 42%. This system uses a Pro DRY S progressive mesh three layer synthetic \"oil free\" filter for maximum airflow and convenience. Also included is a unique rotomolded sealed air box designed to increase airflow using the factory ram air scoop for maximum torque in all weather situations. Takeda intakes come complete with all necessary hardware.\u003c\/p\u003e\n\u003cp\u003eUses Factory Air Scoop: Features a one-piece roto-molded airbox that incorporates the factory front air scoop that captures cold air from the front of the vehicle.\u003c\/p\u003e\n\u003cp\u003e\"Rounded Nose\" Filter Top: An aerodynamic rounded filter top is used to reduce air resistance and direct airflow smoothly into the intake track.\u003c\/p\u003e\n\u003cp\u003eHousing\/Air Filter Interface: This intake system features a unique patent pending filter to air box interface that creates a flawless seal.\u003c\/p\u003e\n\u003cp\u003eEmissions Disclaimer: Some or all of the applications listed are 50-state exempt, please see CARB EO# D-550-16 for details.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eProduct Features:\u003c\/p\u003e\n\u003cp\u003e* Dyno-Proven Gains up to +20 HP \/ +18 TQ.\u003c\/p\u003e\n\u003cp\u003e* Outflows Factory Intake by 42%.\u003c\/p\u003e\n\u003cp\u003e* Sealed Housing Captures Cool Air Directly From Factory Inlet.\u003c\/p\u003e\n\u003cp\u003e* Dyno-Tuned Air Intake Tube.\u003c\/p\u003e\n\u003cp\u003e* Innovative Filter-to-Housing Interface and Minimal Hardware for Fast and Easy Installation.\u003c\/p\u003e\n\u003cp\u003e* Washable and Reusable Pro 5R Air Filter for Maximum Performance.\u003c\/p\u003e\n\u003cp\u003e* Washable and Reusable Pro DRY S Air Filter for Maximum Convenience.\u003c\/p\u003e\n\u003cp\u003e---\u003c\/p\u003e\n\u003cp\u003eFITS:\u003c\/p\u003e\n\u003cp\u003e* 2012 ACURA ILX (2.4L) K24 ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2013 ACURA ILX (2.4L) K24 ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2014 ACURA ILX (2.4L) K24 ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2015 ACURA ILX (2.4L) K24 ENGINE\u003c\/p\u003e\n\u003cp\u003eFITS:\u003c\/p\u003e\n\u003cp\u003e* 2012 HONDA CIVIC SI (2.4L) K24 ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2013 HONDA CIVIC SI (2.4L) K24 ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2014 HONDA CIVIC SI (2.4L) K24 ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2015 HONDA CIVIC SI (2.4L) K24 ENGINE\u003c\/p\u003e","brand":"AFE POWER","offers":[{"title":"Default Title","offer_id":46624930824418,"sku":"AFE-TM-1018P-D","price":395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/0669\/1554\/files\/tm-1018p-r_8.webp?v=1749741542"},{"product_id":"afe-takeda-cat-back-exhaust-system-49-46601-honda-civic-si-sedan-2012-2015-2-4l-k24-engine","title":"AFE \/ TAKEDA \/ CAT-BACK EXHAUST SYSTEM (49-46601) *** HONDA CIVIC SI \/ SEDAN (2012-2015) 2.4L \/ K24 ENGINE","description":"\u003cp\u003eIntroducing the new Takeda exhaust system for the 2012-2015 Honda Civic Si Sedan (FB6). In recent testing this system produced +9 Horsepower and +9 Torque. This exhaust system is constructed from 2.50 Inch mandrel bent stainless steel and is MIG-welded. The system uses a high flow muffler with 2.50 Inch tubing which improves performance across the power band while maintaining a great tone. To finish off this exhaust are dual double wall angle cut 304 stainless steel tips. This exhaust uses all factory hanger locations for a hassle free installation. No modifications necessary.\u003c\/p\u003e\n\u003cp\u003eSimple Installation: All systems use factory mounting locations providing stability and hassle-free installation.\u003c\/p\u003e\n\u003cp\u003eLeak-Free Seal: High quality OE style flange and band clamps are used for a complete 360 degree sealing surface.\u003c\/p\u003e\n\u003cp\u003eAggressive Sound: A free-flowing muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.\u003c\/p\u003e\n\u003cp\u003eEmissions Disclaimer: This product does not require a CARB EO#\u003c\/p\u003e\n\u003cp\u003eAll aFe exhaust systems are engineered and manufactured in our Corona, California facility.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eProduct Features:\u003c\/p\u003e\n\u003cp\u003e* Dyno-Proven Gains up to +9 HP \/ +9 TQ.\u003c\/p\u003e\n\u003cp\u003e* T304 Stainless Steel.\u003c\/p\u003e\n\u003cp\u003e* 2.50 Inch Pipe Diameter.\u003c\/p\u003e\n\u003cp\u003e* 4.00 Inch Exhaust Tips.\u003c\/p\u003e\n\u003cp\u003e---\u003c\/p\u003e\n\u003cp\u003eFITS:\u003c\/p\u003e\n\u003cp\u003e* 2012 HONDA CIVIC SI (2.4L) K24 ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2013 HONDA CIVIC SI (2.4L) K24 ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2014 HONDA CIVIC SI (2.4L) K24 ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2015 HONDA CIVIC SI (2.4L) K24 ENGINE\u003c\/p\u003e","brand":"AFE POWER","offers":[{"title":"Default Title","offer_id":46624942096610,"sku":"AFE-49-46601","price":819.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/0669\/1554\/files\/49-46601a1600.webp?v=1749742226"},{"product_id":"afe-takeda-cat-back-exhaust-system-49-46602-honda-civic-si-coupe-2012-2015-2-4l-k24-engine","title":"AFE \/ TAKEDA \/ CAT-BACK EXHAUST SYSTEM (49-46602) *** HONDA CIVIC SI \/ COUPE (2012-2015) 2.4L \/ K24 ENGINE","description":"\u003cp\u003eIntroducing the new Takeda exhaust system for the 2012-2015 Honda Civic Si Coupe (FG4). In recent testing this system produced +9 Horsepower and +9 Torque. This exhaust system is constructed from 2.50 Inch mandrel bent stainless steel and is MIG-welded. The system uses a high flow muffler with 2.50 Inch tubing which improves performance across the power band while maintaining a great tone. To finish off this exhaust are dual double wall angle cut 304 stainless steel tips. This exhaust uses all factory hanger locations for a hassle free installation. No modifications necessary.\u003c\/p\u003e\n\u003cp\u003eSimple Installation: All systems use factory mounting locations providing stability and hassle-free installation.\u003c\/p\u003e\n\u003cp\u003eLeak-Free Seal: High quality OE style flange and band clamps are used for a complete 360 degree sealing surface.\u003c\/p\u003e\n\u003cp\u003eAggressive Sound: A free-flowing muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.\u003c\/p\u003e\n\u003cp\u003eEmissions Disclaimer: This product does not require a CARB EO#\u003c\/p\u003e\n\u003cp\u003eAll aFe exhaust systems are engineered and manufactured in our Corona, California facility.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eProduct Features:\u003c\/p\u003e\n\u003cp\u003e* Dyno-Proven Gains up to +9 HP \/ +9 TQ.\u003c\/p\u003e\n\u003cp\u003e* T304 Stainless Steel.\u003c\/p\u003e\n\u003cp\u003e* 2.50 Inch Pipe Diameter.\u003c\/p\u003e\n\u003cp\u003e* 4.00 Inch Exhaust Tips.\u003c\/p\u003e\n\u003cp\u003e---\u003c\/p\u003e\n\u003cp\u003eFITS:\u003c\/p\u003e\n\u003cp\u003e* 2012 HONDA CIVIC SI (2.4L) K24 ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2013 HONDA CIVIC SI (2.4L) K24 ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2014 HONDA CIVIC SI (2.4L) K24 ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2015 HONDA CIVIC SI (2.4L) K24 ENGINE\u003c\/p\u003e","brand":"AFE POWER","offers":[{"title":"Default Title","offer_id":46624959332578,"sku":"AFE-49-46602","price":819.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/0669\/1554\/files\/49-46601a1600.webp?v=1749742226"},{"product_id":"afe-silver-bullet-throttle-body-spacer-46-37001-honda-civic-si-2012-2015-2-4l-k24-engine","title":"AFE \/ SILVER BULLET \/ THROTTLE BODY SPACER (46-37001) *** HONDA CIVIC SI (2012-2015) 2.4L \/ K24 ENGINE","description":"\u003cp\u003eThe Silver Bullet throttle body spacer is constructed from precision machined 6061-T6 billet aluminum and is designed using a serrated\/helix design that creates turbulence in the airflow at the point just prior to entry into the engine optimizing the combustion cycle. This turbulence helps the air\/fuel charge burn completely providing increased horsepower, torque and improved throttle response. During testing, Silver Bullet throttle body spacer have resulted in +7 Horsepower and +8 Torque max gains.\u003c\/p\u003e\n\u003cp\u003eSerrated\/Helix Design: The Serrated\/Helix combination design creates intake turbulence in the combustion chamber. This turbulence breaks up the fuel which creates a more complete combustion cycle increasing horsepower, torque and improving throttle response. The Serrated\/Helix combination design also reduces intake whistle that occurs with Helix only designs.\u003c\/p\u003e\n\u003cp\u003e6061-T6 Billet Aluminum Construction: All Silver Bullet Throttle Body Spacers are constructed from 6061-T6 billet aluminum precision machined for light weight, high strength and perfect fit and finish.\u003c\/p\u003e\n\u003cp\u003eLonger Intake Tract: Adding a Silver Bullet Throttle Body spacer lengthens the intake tract which helps increasing intake air speed increasing performance and improved throttle response.\u003c\/p\u003e\n\u003cp\u003eInstallation Is A Snap: This Silver Bullet throttle body spacer uses all factory mounting locations providing stability and a hassle-free installation.\u003c\/p\u003e\n\u003cp\u003eEmissions Disclaimer: Some or all of the applications listed are 50-state exempt, please see CARB EO# D-550-17\/D-550-47 for details.\u003c\/p\u003e\n\u003cp\u003eThis CARB EO excludes the following Engine Test Groups: HHNXV03.5GK3, GHNXV03.5KK3, FHNXV03.5MK3, EHNXV03.5SC3, 8HNXV03.5BMC, 9HNXV03.5EC3, DHNXV03.5VC3.\u003c\/p\u003e\n\u003cp\u003eAll aFe intake systems are engineered and manufactured in our Corona, California manufacturing facility.\u003c\/p\u003e\n\u003cp\u003eFitment Note: A slight modification to the intake tube is needed when used with aFe's Takeda intake system (PN TM-1018P-X).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eProduct Features:\u003c\/p\u003e\n\u003cp\u003e* Dyno-Proven Gains up to +10 HP \/ +8 TQ.\u003c\/p\u003e\n\u003cp\u003e* CNC-Machined from Durable 6061-T6 Billet Aluminum.\u003c\/p\u003e\n\u003cp\u003e* Unique Serrated\/Helix Entry Design Creates Turbulence and Reduces Whistle Sound.\u003c\/p\u003e\n\u003cp\u003e* Increases Air Speed, Improving Performance and Throttle Response.\u003c\/p\u003e\n\u003cp\u003e---\u003c\/p\u003e\n\u003cp\u003eFITS:\u003c\/p\u003e\n\u003cp\u003e* 2012 HONDA CIVIC SI (2.4L) K24 ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2013 HONDA CIVIC SI (2.4L) K24 ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2014 HONDA CIVIC SI (2.4L) K24 ENGINE\u003c\/p\u003e\n\u003cp\u003e* 2015 HONDA CIVIC SI (2.4L) K24 ENGINE\u003c\/p\u003e","brand":"AFE POWER","offers":[{"title":"Default Title","offer_id":46625025949922,"sku":"AFE-46-37001","price":140.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/0669\/1554\/files\/46-37001a1600.webp?v=1749744936"}],"url":"https:\/\/phantasmtuning.myshopify.com\/collections\/honda-civic-si-2012-2015-gen-9-k24-engine.oembed","provider":"PHANTASM","version":"1.0","type":"link"}